I believe on the power edge servers you will be locked out from booting. However if you have a monitor connected to the VGA port you would be reading a message flagging the failed power supply and press F1 to continue with boot. So press F1 for now but e sure to get another supply on order Regards, Jeff Sent from my iPhone On 2013-03-18, at 6:10 PM, "Venu Navuluri" <venunavuluri@xxxxxxxxx> wrote: > List, > I have a P91 Poweredge 2900 thats not booting up, i am getting a > BSOD once i pass the Win 2003 splash screen. I observed that the redundant > power supply does not have a green light come up on the back of the AW near > the power supply unit, and the message shown in status display also > reflects the same. Is it absolutely necessary that a redundant power supply > is needed for this class of AW. Is there an option where you can turn off > the necessity for redundant power supply. > > Appreciate your help guys > > Venu > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave