Re: [foxboro] PIO bus errors - SYSMON messages
- From: "Pauwels, Dirk" <dirk.pauwels@xxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 13 Apr 2007 09:37:25 +0200
We also have CP60's (3.30/OP)and FCM10e (1.16/OK)(and a couple of ef's)
and we experienced the same errors as you did. Our i/o's are +/- 130m
from the CP's and we still used coax. Changing coax to Fibre took care
of most of the errors. If you are already using fibre (I suppose you are
because you have FCM10EF's) and you always have the errors on the same
bus you might want to change the fibre patchcable, or if you have FT
FCM's you could try swapping the FCM from the problem bus with an FCM
that does not cause problems. If the errors move to the other FCM,
you've found the origin of the errors.
I suppose the CP60 was not one of Foxboro's most reliable processors,
we've had problems with them from the start, I think they've all been
exchanged for newer revisions about 3 times by now. We're planning on
upgrading to ZCP270's if and when I ever get a price quote from Foxboro
(applied for a quote in febr, still haven't received any quotes yet....)
Good luck
Rgds,
Dirk=20
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of aad@xxxxxxxxxxxxx
Sent: donderdag 12 april 2007 23:36
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] PIO bus errors - SYSMON messages
Good Day
I have an installation - AW70 - XP with Foxboro Version 7.0 with CP60's
and FCM10ef's.
We are experiencing excessive PIO bus errors from four of the CP's
I have implemented the recommendations of the "SA2005064I - QF1007465b"
and all FCM's are on software revision 1.16.
I have monitored the PIOE1R, PIOEFT, PIOEGB parameters using the
"all-pio-read" and "all-pio-reset" scripts and have not recoreded
any
errors on the problematic CP's.
The System Monitor still records messages with PIO bus falures and
errors
for these CP's.
Sample of SYSMON log:
2007-04-11 11:41:17 OSCP06 Equip =3D P06121 SYSMON -00068 Single PIO Bus
Access Error on A
2007-04-11 11:41:17 OSCP06 Equip =3D P06122 SYSMON -00068 Single PIO Bus
Access Error on A
2007-04-11 11:41:40 OSCP06 Equip =3D P06224 SYSMON -00068 Single PIO Bus
Access Error on A
2007-04-11 11:42:00 OSCP06 Equip =3D P06100 SYSMON -00172 FCM A module
Failed
2007-04-11 11:42:01 OSCP06 Equip =3D P06115 SYSMON -00068 Single PIO Bus
Access Error on A
2007-04-11 11:42:01 OSCP06 Equip =3D P06100 SYSMON -00193 FCM A no =
longer
failed
2007-04-11 11:42:01 OSCP06 Equip =3D P06121 SYSMON -00070 Single PIO Bus
Access Recovery on A
2007-04-11 11:42:01 OSCP06 Equip =3D P06122 SYSMON -00070 Single PIO Bus
Access Recovery on A
2007-04-11 11:42:25 OSCP06 Equip =3D P06224 SYSMON -00070 Single PIO Bus
Access Recovery on A
2007-04-11 11:42:42 OSCP06 Equip =3D P06115 SYSMON -00070 Single PIO Bus
Access Recovery on A
2007-04-11 11:43:16 OSCP06 Equip =3D P06200 SYSMON -00172 FCM A module
Failed
2007-04-11 11:43:16 OSCP06 Equip =3D P06231 SYSMON -00068 Single PIO Bus
Access Error on A
2007-04-11 11:43:16 OSCP06 Equip =3D P06200 SYSMON -00193 FCM A no =
longer
failed
2007-04-11 11:44:02 OSCP06 Equip =3D P06231 SYSMON -00070 Single PIO Bus
Access Recovery on A
What am I not getting?
What is the System Monitor monitoring?
What else can I look at?
Any ideas and help would be appreciated.
Thanks
Ashley Davey
Protea Automation Solutions(Pty) Ltd
Johannesburg
South Africa
-------------------------------------------
South Africas premier free email service - www.webmail.co.za=20
------------------------------------------------------------------
For super low premiums, click here http://www.webmail.co.za/dd.pwm
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin
to unsubscribe: =
mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
