Troy, This works for FoxCAE and IACC that the loops contain Compounds. IEE naming conventions are different the loops are contained in Compounds. This means under each Compound will be multiple loops with uniqe names. Bob Schwarz North America Learning Services Technical Education Manager 33 Commercial St - B51-2A Foxborough, MA 02035 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Brazell, Troy L Sent: Wednesday, December 07, 2011 9:22 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] IEE Strategy Naming Conventions My two cents after doing 5 of this (not to IEE) but to IACC is; CP_Name = Main plant area Under the CP_Name. I use the compound name as the next area. Then for the CSD (Loop ID) Name I use the Main Controller i.e. PIC100. From complex loops I use the main controller name. I have also made modifications to our standard overlays so that the faceplate displays the compound, block, and CSD name. We were all old ICC users used to looking for blocks inside a compound so this worked best for us. As I said ....... Just my two cents. Troy Brazell DCP Midstream Senior Process Control Analyst ISA CCST Office 405-605-3877 Cell 405-301-2994 tlbrazell@xxxxxxxxxxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave