Re: [foxboro] How to configure FBM233 for multiple slave ID?
- From: Mohammad Hafiz <mhafiz1403@xxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Sat, 9 Feb 2013 14:15:42 +0300
I couldn't found any documentation about this but its working now. Thanks a
lot Matt, you solved the problem.
Regards,
Hafiz.
On Thu, Feb 7, 2013 at 4:29 PM, Kinsinger, Matthew R <mkinsinger@xxxxxxx>wrote:
> yes, you put the IP address then /##, with ## being the slave ID. This is
> what I remember from memory (maybe the slash needs to go \##, look it up ),
> I think some of the documentation erroneously tells you to put the slave ID
> elsewhere, but I do this all the time. I have maybe 60 nodes on one Modbus
> ethernet gateway, often times with 5-12 nodes on one ethernet/serial
> converter.
>
> Matt
>
> ________________________________________
> From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On
> Behalf Of Mohammad Hafiz [mhafiz1403@xxxxxxxxx]
> Sent: Thursday, February 07, 2013 6:34 AM
> To: foxboro@xxxxxxxxxxxxx
> Subject: [foxboro] How to configure FBM233 for multiple slave ID?
>
> Hi all,
> I have 4 devices which have slave ID 1,2,3,4 each. All of them will
> connected to one converter to convert from modbus serial to modbus tcp/ip.
> This converter using IP 192.168.11.11 as its IP and then coming to DCS via
> FBM233.
>
> May I know is this configuration possible? If it possible, which parameter
> should I concern in ECB202 and ECB201?
>
> Thanks
>
> Hafiz.
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
