Thank you,
but in this case I am not necessarily referring to an AW with keyboard,
the AW however has a pan and tab file filled with Tags and their displays.
In this company the operators use only 1 button on the keyboard: the
acknowledge button. However, there is the alarm manager on AWs with and
without keyboard (the process button next to system button). There a
User_disp can be called too, without the presence of a keyboard, but
with the presence of pan and tab file, right?
And that is where my problem is, on AW with and without keyboard, when
clicking this button that calls user_disp on alarm manager the wrong
picture openes.
Am 01.03.2019 um 15:57 schrieb Russ Boulay:
Alarms are sent to an annunciator keyboard to light the led of a button,
per the alarm panel AAtab file.
Whatever display is assigned to that same button is considered the user
disp.. AApan
If no display assigned, the default display of the alarm point is suppose
to appear
The theory is, Alarm comes in, LED lights, push that button, display
appears.\User Disp uses these references..
On Thu, Feb 28, 2019 at 7:02 AM Redacted sender k.kilokilo for DMARC <
dmarc-noreply@xxxxxxxxxxxxx> wrote:
Hello dear list readers,
I have a small annoyance with an alarm manager.
After clicking an alarm in alarm manager the operator clicks a button to
open the graphic where the tag is found. This button is set to
"user_disp", for calling the display of this alarm.
Where is then configured which fdf has to be opened?
Foxdoc B0700AP_B says in alarm table and alarm panel.
In there are the alarms defined, but the fdf that is configured there is
a different one than the one that is opened.
The problem is that a alarm management graphic is opened, instead of the
wanted normal fdf file.
My take is, the displays are searched alphabetically and the alarm
management graphics of the client are in the folder "AM", therefore
found before the actual display wanted.
Where can I set the display to open? Additionally, for alarms not
configured in tab and pan file, where is pointed to the graphics root
folder? The search has to start somewhere, but this configuration in
DispAlarmCfg I have not found yet. Can the search be configured
diferently, globally? Not alphabetically, but reverse alphabetically?
Or only specific subfolders within the display folder?
best regards,
Dmitri
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave