Hi Ali, Based on your description that you restore a mirrored AW setup to a single one, you should check the following : - Put the install CD into your new system and boot it from disk, next mount the root path of your restored disk e.g. : mkdir /tmp/root, mount -Fhsfs /dev/dsk/c01t0d0s0 /tmp/root or something similar (execute format to determine the disk number) cd /tmp/root/etc vi system (unmark the mirror lines at the end) vi vfstab (modify all references to your mirror disk items and replace them with the fysical disk layout (/dev/dsk/c0t0d0sX mounts) Execute an fsck to each of your partitions Next reboot from your hard-disk If this does not work check your eeprom settings Be Lucky Lieven Taleman Software consultant TALSOFT B.V.B.A - Belgium -----Oorspronkelijk bericht----- Van: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]Namens Ali Ahmed Verzonden: woensdag 29 maart 2006 15:07 Aan: foxboro@xxxxxxxxxxxxx Onderwerp: [foxboro] Hard disk restore on AW51E Hi All, Is there any issue of host id if a tape backup of one AW51E is restored to another AW51E having same hard disk size. We are trying to restore a tape backup of AW51E (having two mirrored 18.2 GB hard disks) on another AW51E having single 18.2GB hard disk. The system completes the restore successfully but on reboot it goes into reboot cycle. Do anyone has experienced such problem before? Kindly share your experience. Rgds, Ali Ahmed Zahidi Pakistan Refinery Ltd. Karachi, Pakistan. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave