There's a pretty good help file for oma: /opt/fox/bin/tools/oma.hlp. Assuming you're on Solaris. Not sure about XP. And there is a built-in help screen for som/rsom, accessible with '?' at any prompt once you're in the program. Duc -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of dirk.pauwels@xxxxxxxxxx Sent: Thursday, January 17, 2008 10:08 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Fw: smurfing String's Hi Alex, thanks for the tips. Can you point me to a manual on oma & rsom because I'm not familiar with it and there don't seem to be any manuals on our system in /opt/fox/bin/remote/tools, couldn't find anything on GPS I already used pdfpack -r and optimize but that didn't solve it. The tags are ok, all tags are updating when the sequence is running. When I close the display and open it again the fields are smurfed again until the sequence IO0001 changes again....It's the only display behaving strange and it started without any reason it seems..... Thanks & rgds, Dirk Pauwels - DCS/MOC coordinator Engineering dept. Hexion Specialty Chemicals E mail: dirk.pauwels@xxxxxxxxxx T. +32.(0)3.570.95.97 F. +32.(0)3.570.16.09 Mob. +32.(0)497.428.300 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave