about the same...but different... which is the up-to-date Foxboro I/A approach for PLCs integration ? we have several AB-PLC5 and AB-SLC500 with abstations and with int30+KF2...and we are reaching the comm limits... by the way...we have CPs 40A. regards Jaime Claramunt IFORSA Paper Mill -----Mensaje original----- De: CLeddon@xxxxxxx [mailto:CLeddon@xxxxxxx] Enviado el: Viernes, 07 de Mayo de 2004 13:55 Para: foxboro@xxxxxxxxxxxxx Asunto: Re: [foxboro] Foxboro IA NT integration with Rosemount Delta V using OPC PS You will probably not be using the AIM*OPC if you want to build blocks in IA. The AIM*OPC is for the historian interface. It's pretty cool also but it sounds like you want control blocks. Chuck Leddon 770-331-4303 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave