We've used AIM*OPC Server for integrating to other DCS systems with no = problem. * K > -----Original Message----- > From: Control y Automatizacion (Rodolfo Piedra) > [mailto:rpiedra@xxxxxxxxxxxxx] > Sent: Friday, May 07, 2004 1:02 PM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] Foxboro IA NT integration with Rosemount Delta V > using OPC >=20 >=20 > Need to send real time data back and forth from Foxboro IA NT=20 > to Rosemount Delta V, we will prefer a OPC based solution. > Suggestions or previous experience in similar jobs? >=20 >=20 > Regards, >=20 > Rodolfo Piedra > Control y Automatizaci=F3n SA >=20 > =20 > =20 > ______________________________________________________________ > _________ > This mailing list is neither sponsored nor endorsed by=20 > Invensys Process > Systems (formerly The Foxboro Company). Use the info you=20 > obtain here at > your own risks. Read=20 > http://www.thecassandraproject.org/disclaimer.html > =20 > foxboro mailing list: =20 > //www.freelists.org/list/foxboro > to subscribe: =20 > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin > to unsubscribe: =20 > mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > =20 >=20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave