Delete the file . Then recall foxselect. Does the MACaddress match the running CP mac? /opt/fox/bin/tools/fist CPNAME Also, arp -a on host of CP Does MAC and IP match running CP -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Pablo Lioi Sent: Thursday, July 26, 2007 7:37 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] FoxSelect problem = Sean, = Thanks for your answer. The ini file looks OK, the PSAP address of the problematic CP contains the correct MAC address as seen in system monitor andthe leading and trailing digits match the other (working) stations in the system. = At first there was a difference in the leading and trailing digits of the PSAP address of the non-communicating CP compared against the other stations,and it looked as if there was a missing digit in the leading part, see the following: = CP2712=3D5803-405-d-4930303030303000006cc000ea04600505040000 CP2711=3D4143-5c43-d-4930303030303000006cc000de6f72655c696e63 AB3003=3D4143-5c43-d-4930303031303100006cc000466f72655c696e63 (the problematic CP is the first in the list) = , but after several refresh commands in foxselect, the ini file entry changedto = CP2712=3D4143-5c43-d-4930303030303000006cc000ea6f72655c696e63 Anyway, the CP is still not communicating with FoxSelect = Regards = Pablo = ------------------------------------------------------------------------ ---- From: "Redmond, Sean S" <Sean.Redmond@xxxxxxxxxxxxxxxxxx> Reply-To: foxboro@xxxxxxxxxxxxx To: <foxboro@xxxxxxxxxxxxx> Subject: Re: [foxboro] FoxSelect problem Date: Thu, 26 Jul 2007 13:15:28 +1200 >Hi Pablo, > >>But FoxSelect can't access one of them (red cross >over it, and doesn't refresh when double-clicked). > >Have you had a look at the foxselect ini file. It is in >/opt/fox/wp/FoxSelect and has the name FSDMNAME.ini The ini file stores >the address of the cps. This file might have become corrupt or perhaps >had its file permission changed.=3D20 > >Sean >NZ Steel >-----Original Message----- >From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] >On Behalf Of Pablo Lioi >Sent: Thursday, 26 July 2007 5:20 AM >To: foxboro@xxxxxxxxxxxxx >Subject: [foxboro] FoxSelect problem=3D20 > >=3D20 >Hi everybody=3D20 > >We have several FCP270 fault tolerant pairs in our Mesh network. All of >them >are working, can be accessed with IACC, communicate with Foxview and >show in >System monitor as healthy. But FoxSelect can't access one of them (red >cross >over it, and doesn't refresh when double-clicked). Before this problem >started, we had been regurlarly using FoxSelect to access >compounds/blocks >inthis processor pair.=3D20 > >We have already:=3D20 > >-Checkpointed the processor from system manager=3D20 > >-Checkpointed the processor from IACC=3D20 > >-Rebooted the shadow processor from system manager.=3D20 > >-Tried to access the processor with FoxSelect from the AW and all the >WP's=3D20 > >Any ideas?=3D20 > >Thanks=3D20 > >Pablo Lioi=3D20 > >Systems Engineer=3D20 > >TOTAL AUSTRAL=3D20 > >ARGENTINA > > > >=3D0A=3D0ANOTICE - This message and any attached files may contain informatio=3D >n that is confidential and intended only for use by the intended recipien=3D >t. If you are not the intended recipient or the person responsible for de=3D >livering the message to the intended recipient, be advised that you have =3D >received this message in error and that any dissemination, copying or use=3D > of this message or attachment is strictly forbidden, as is the disclosur=3D >e of the information therein. If you have received this message in error =3D >please notify the sender immediately and delete the message. > > >_______________________________________________________________________ >This mailing list is neither sponsored nor endorsed by Invensys Process >Systems (formerly The Foxboro Company). Use the info you obtain here at >your own risks. Read http://www.thecassandraproject.org/disclaimer.html > >foxboro mailing list: //www.freelists.org/list/foxboro >to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin >to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave > ------------------------------------------------------------------------ ---- See what you're getting into...before you go there [1] --- Links --- 1 http://g.msn.com/8HMAENUS/2734??PS=3D47575 = = _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html = foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave = Confidentiality Notice: The information contained in this electronic message and any attachment(s) = to this message are intended for the exclusive use of the recipient(s) and = may contain confidential, privileged or proprietary information. If you are= not the intended recipient, please notify the sender immediately, delete a= ll copies of this message and any attachment(s). Any other use of the E-Mai= l by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave