The default operation of any environment when its called up on a remote
terminal (not the console of the AW itself) is to have OM Set operations
disabled.
You enable them by adding a line into the environment change file. That line
should read
enable omsets
That will, as it says, enable OM Set operations, and will put a message in the
message line of FoxView saying so.
William C Ricker
EOSYS
formerly PREMIER System Integrators
Office: 770.426.4422 | Mobile: 770.572.8868
William.Ricker@xxxxxxxxxxxxxx
www.eosysgroup.com
Careers | LinkedIn | Facebook | Chat in Teams
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx <foxboro-bounce@xxxxxxxxxxxxx> On Behalf Of
Janne Karvinen
Sent: Monday, June 6, 2022 7:49 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Faceplates: Setting Process Variables Disabled
EXTERNAL EMAIL
(TO:PREMIER)
Hi List,
I've got involved in a recommissioning of an old plant, basically with no
supporting documentation for I/A (8.5) or FoxView (10.2.2). There are
4 environments available, operators have been using one for engineering in the
past. When we instructed them to use the one for Operators, manual operation
from faceplates became blocked ("Setting Process Variables Disabled" message
when trying to ramp or enter a value). As said, this is an old system and
there's no background information or documentation available & no one has
Foxboro background. While the whole idea of manual operations being blocked in
Operator environment is very strange, are there any hints what could be done?
Thanks.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
________________________________
Confidentiality Notice:
The information contained in this message is private and confidential. This
information is intended only for the individual or entity named above. If the
reader of this message is not the intended recipient, you are hereby notified
that any use, review, dissemination, distribution, copying or action taken
based on this message or its attachments, if any, is strictly prohibited. If
you are not the intended recipient, please contact the sender by reply email
and delete or destroy all copies of this message and any attachments. Thank you.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
