Try a different PCI slot. I've never identified the root source of the issue, but I know that not all PCI slots are created equal on the 51D. Tony Pillo Sr. Lead Engineer Invensys Systems Canada Inc. - Calgary tel:403.777.4272 mailto:tpillo@xxxxxxxxxx -----Original Message----- From: Perez, Claudio [mailto:CPerez@xxxxxxxxxxxxxxxx] Sent: October 25, 2002 5:26 AM To: 'Cassandra Project' Subject: [foxboro] Dual monitor in V6.4 Hi list: We are upgrading a WP51D from 6.1.2 to 6.4 with a dual monitor using a PGX32 (Raptor GFX OpenWindows for Solaris) video card. We followed = the standard procedure included in BO400PT but it didn=B4t work. During = the booting process the second video card isn=B4t detected. Any idea? Thanks. Claudio A. Perez Sr Control Systems Engineer PROFERTIL S.A. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave