Damn, Russ is good!!! I had just found this little jewel in the V6.0 Release Notes (I am at V6.4 but it was not in the V6.4 Release Notes) minutes before Russ' response: FoxSelect Displays When a new configuration containing new letterbug and PSAP address assignments is installed, the .INI files (used by FoxSelect to cache its PSAP addresses) should be deleted. Each instance of FoxSelect has the same name as the FoxView that starts it. Each named instance of FoxSelect saves its content into an initialization file named: /opt/fox/wp/FoxSelect\FS<name>.INI For each instance of FoxSelect, delete this file. And it worked, the FoxSelect is now looking at the correct C:Bs for each CP. Thanks again, Russ... Joseph M. Riccardi 386-441-0250 Office 386-451-7607 Cell Joe@xxxxxxxxxxxxx "To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Boulay, Russ Sent: Thursday, February 13, 2014 5:50 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Different FoxSelect views from different AWs When was the last time you flushed the FoxSelect list cd /opt/fox/wp/foxselect remove the .ini files for each dm reopen FoxSelect...select the CP in question to rebuild list ____________________________________________________________________________ _________ Russ Boulay | Schneider Electric | Invensys | United States | Support Engineering Manager Phone: +1 508 446 1769 | Mobile: +1 508 446 1769 Email: russ.boulay@xxxxxxxxxxxx | Site: www.invensys.com | Address: 2000 Crow Canyon Place Suite 170, 94583 San Ramon, California, United States *** Please consider the environment before printing this e-mail -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Joseph M. Riccardi Sent: Thursday, February 13, 2014 5:14 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Different FoxSelect views from different AWs Russ, Reference the old e-mail thread below... I see a similar situation with FoxSelect at this plant but with a weird twist on all of the AWs, except the CSA and CP host AW; it's the only one working correctly. Just 4 CPs and they show up in the FoxSelect list but... CP1 has CP4 Compounds listed, CP2 and CP3 Compounds look OK (I guess?), but cannot even open CP4. I checked all of the files you referenced below (/etc/wpcplns & cplns, /etc/fox/wpcplns & cplns) and they list the 4 CPs. Just to make sure I copied each file from the host AW to a non-host AW and no help. Also, it takes 10-20 seconds to call up a list of the Blocks in a Compound, and another 10-20 seconds to call up a Block Detail Display. Any ideas? Joseph M. Riccardi 386-441-0250 Office 386-451-7607 Cell Joe@xxxxxxxxxxxxx "To give real service you must add something that cannot be bought or measured with money; and that is sincerity and integrity." - Donald A. Adams -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Boulay, Russ Sent: Thursday, January 9, 2014 9:01 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Different FoxSelect views from different AWs Also check /etc/fox/wpcplns and cplns in both directories.....the refernces have bounced around over the years -----Original Message----- From: Boulay, Russ Sent: Thursday, January 09, 2014 8:46 PM To: foxboro@xxxxxxxxxxxxx Subject: RE: [foxboro] Different FoxSelect views from different AWs Those listings come from files not CSA so different commits were used...or someone manually edited the /etc/wpcplns file on each station -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Maizlin, Ilya [AT] Sent: Thursday, January 09, 2014 8:24 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Different FoxSelect views from different AWs Hi, There. Have the following situation was hoping to resolve. We have a small offline system consisting of 8 AWs that has not been used for a long time. Each AW is hosting a small number of CPs (FCP270s). When launching a FoxSelect on each AW, one would see different set of CPs available in FoxSelect (depending on which AW they launch it from). Similar effect is observed when using ICC. The possibilities we are currently speculating on are: 1) different SysDefs were used to commit each AW. 2) a CSA conflict is observed within the system (more than 1 active CSA server). The system is an IA 8.4 with WindowsXP and FCP270s. What would you suggest to look at in order to detect and rectify the root cause. Any insight will be appreciated. Regards, Ilya Maizlin. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email comes from a division of the Invensys Group, owned by Invensys plc, which is a company registered in England and Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023). For a list of European legal entities within the Invensys Group, please select the Legal Entities link at invensys.com. Invensys PLC is owned by the Schneider-Electric Group. You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail reception@xxxxxxxxxxxx. This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave