FYI: The same holds true for PLB Ladder Logic to be viewed on another workstation other than the host. The Foxview (or DM) files must be copied for each PLB block. - PLB Files: usr\plcfv\CMP_NAME\PLB_NAME\*.fdf Another gotcha to be aware of is that it becomes very easy to have out-of-date files for either the sequence of PLBs on various machines. This can be worse than none at all. Tom Badura Plastics Engineering Company tbadura@xxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of René Morales Sent: Friday, September 28, 2012 12:47 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Detail Display for Sequence blocks Dear List, In a mixed versión system (Windows 8.6 and Legacy 7.1.4), there is a problem when the code (CODE button) is called from the sequence block detail display, the foxview shows a cyan sector instead of the code. The block is hosting in a AW51F (V7.4.1), the detail display is called from P90 (V8.6). If you call a sequence and code of a block hosted in the P90, there is not problem. Any ideas to fix that? Regards, René _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave