René, If you use PLB logic, you'll have a similar problem with not seeing the ladder logic displays on the non-host machine. These files are in the /usr/plcfv/COMPOUND directories and are .pdf files on the legacy side which need to be converted to .fdf files on the Windows side. Once you copy the files to where they need to be, you'll need to run the pdf_fdf utility on the Windows box to do the conversion as follows: /usr/fox/wp/bin/tools/pdf_fdf -r -s /usr/plcfv Regards, Doug DGL Controls -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of René Morales Sent: Friday, September 28, 2012 3:34 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Detail Display for Sequence blocks Kevin, There is no <compound name> directory on the mesh station, Do You mean create the compound directory (with the same name as the legacy host) and then copy the .r files? Regards, René -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Beauchamp Sent: Friday, September 28, 2012 1:20 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Detail Display for Sequence blocks Rene, The CODE button works if you copy the sequence code ".r" file from the host AW to the box you are trying to view it on. The ".r" file is located in /opt/fox/ciocfg/<compound name>/. Thank you, Kevin Beauchamp Engineering Manger 920-585-5080 Galloway Company Neenah, WI -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of René Morales Sent: Friday, September 28, 2012 12:47 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Detail Display for Sequence blocks Dear List, In a mixed versión system (Windows 8.6 and Legacy 7.1.4), there is a problem when the code (CODE button) is called from the sequence block detail display, the foxview shows a cyan sector instead of the code. The block is hosting in a AW51F (V7.4.1), the detail display is called from P90 (V8.6). If you call a sequence and code of a block hosted in the P90, there is not problem. Any ideas to fix that? Regards, René _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave