Ben,
Can you describe the ISA/SAMA configuration of this control scheme? Feel
free to send a copy direct to my email joe@xxxxxxxxxxxxx since this list
does not allow attachments. Maybe it is a Discharge/Suction pressure
override loop Cascaded to the flow controller? But each Compressor does not
have its own controller?
Joseph
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx <foxboro-bounce@xxxxxxxxxxxxx> On Behalf
Of ben sahraoui
Sent: Tuesday, December 8, 2020 1:31 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Compressors Loadsharing optimal PID parameters
hi folks,
I have 4 compressors load-sharing control with Discharge Pressure
controller PIC004, suction Pressure Controller PIC008 and Discharge Flow
controller FIC001.
I'm looking for the optimal PID parameters to start from if anyone can help.
thanks a lot
ben.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave