Thanks for your response Tadeo. So configured in this way, acking the compound will acknowledge any subordinate block and cause the LED to go solid? Ken -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Tadeo Armenta Sent: Saturday, December 03, 2011 7:01 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Annunciator Keyboard Slow Response This alarm ack feature on the button of annunciator keyboard didnt work well for me either. On my case, i used to acknowledge by compound present in the display. but still it took form 6 to 10 seconds to callup the display. On my experience it took about a second to acknowledge each compound. I know it doesnt help but is just to point out that is not related to not finding a block exclusively Regards ---------------------------------------------------------------------- This e-mail contains Omaha Public Power District's confidential and proprietary information and is for use only by the intended recipient. Unless explicitly stated otherwise, this e-mail is not a contract offer, amendment, or acceptance. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave