Re: [foxboro] Annunciator Keyboard Slow Response
- From: "DUNHAM, KENNETH J" <kdunham@xxxxxxxx>
- To: "'foxboro@xxxxxxxxxxxxx'" <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 17 Oct 2011 17:53:06 +0000
Russ,
I did verify that we don't have any duplicated dmcmd blocks, we do have several
buttons that point to the same display to open.
I didn't receive any messages on reboot but during testing, when generating an
alarm I got the following messages on the CAD:
1) The Alarm Manager is automatically refreshing all active displays
because the Alarm Alert Task has restarted. The alarm database was not
recovered.
2) The alarm manager is unable to obtain new alarms because the alarm
alert task has failed.
I haven't figured this issue out yet.
Kenneth Dunham
ERF/DCS System Engineer,
Fort Calhoun Station
9610 Power Lane, Blair, NE 68008
Mail Stop FC 1-9
Phone: (402) 533-6934
email: kdunham@xxxxxxxx
Good judgement comes from experience.
Experience comes from bad judgement.
(Author Unknown)
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Monday, October 17, 2011 12:12 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Annunciator Keyboard Slow Response
If that was the problem...when machine boots up....you would see messages in
the FoxView message bar...
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of DUNHAM, KENNETH J
Sent: Monday, October 17, 2011 10:10 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] Annunciator Keyboard Slow Response
Thanks Russ. I'll look for duplications.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Boulay, Russ
Sent: Monday, October 17, 2011 11:40 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] Annunciator Keyboard Slow Response
This should happen within seconds....there is a configuration problem with your
setup.
While you can thousands of entries on a given annunciator keyboard...all
entries must be unique ....meaning no two keys can have same alarm entry...
AAtab file is for alarming
AApan file is for displays
These are separate entities.
When you say scripts...what do you mean?
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of DUNHAM, KENNETH J
Sent: Monday, October 17, 2011 9:33 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Annunciator Keyboard Slow Response
List,
We are installing an annunciator keyboard for the first time and I have a
question related to the slow response time on opening a configured display.
On a few of the buttons, we have configured numerous STATE and REALM alarms to
light the LED and acknowledge the alarm. In one particular case, it takes
almost 6 minutes to open the designated display. On the button where only two
alarms are configured, it takes about 6 seconds.
Is there any way to speed this up or is this just a limitation based on the
running scripts? Seems kind of useless this way.
Any advice would be appreciated.
Ken Dunham
DCS System Engineer
Fort Calhoun Station
----------------------------------------------------------------------
This e-mail contains Omaha Public Power District's confidential and proprietary
information and is for use only by the intended recipient. Unless explicitly
stated otherwise, this e-mail is not a contract offer, amendment, or
acceptance. If you are not the intended recipient you are notified that
disclosing, copying, distributing or taking any action in reliance on the
contents of this information is strictly prohibited.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process Systems
(formerly The Foxboro Company). Use the info you obtain here at your own risks.
Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
