Hi
Thanks for reply.
Whether after installing QF problem resolved?
Thanks and Regards
Prakash G
On 30 Apr 2016 9:59 am, "Hariharan Srinivasan" <
Hariharan.Srinivasan@xxxxxxxxx> wrote:
We have faced the same issue of viewing the historian alarms. The
Schneider electric engineer has suggested the below points:
1. The maximum historian alarms that can fetched in the view is only
40000, (we had set @ 75000, same was corrected).
2. Latest quick fix QF1189216 was installed.
3. In our case, alarms were not properly defined due to which more alarms
were getting generated. We are reviewing and redefining the alarms.
4. He has suggested for System auditor (Fox ray), which has better alarm
handling facility.
With regards,
Hariharan.S
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Prakash I.G.
Sent: 30 April 2016 08:20
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] Alarm history
Hi
We are not getting process alarms history eventhough the back up files are
generating. Anybody can guide me for this problem.
Thanks and Regards
Prakash G
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
