When booted from CDROM type the format command to see what hard disks are present. You will see the disks present with their controller, target and disk. It will look like: AVAILABLE DISK SELECTIONS: 0. c1t0d0 There will be more information about the type and devices path information. You are concerned with the "c#t#d#". For Ultra-30 the first disk could be "c0t0d0" on Ultra-60 it will be "c1t0t0" if you dont see the disk for the appropriate workstation restore will not work. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx on behalf of waseem ghani Sent: Thu 10/23/2008 6:23 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] AW51E backup restoration on mirrored HDD Thanks for the reply, here is our response pointwise. We have checked these aspects and here are our findings: 1. Mirrored HDD was kept OFF during the restoration 2. The Primary HDD was connected to the SCSI on the workstation 3. The added SCSI was on slot no.4 as stated in IA documentation 4. The running station is Foxboro Model: P69006100291 Style/ Rev: GA Enet Address: o:3:BA:03:2C:A7, Host ID 83032CA7 from which we took " BACKUP" and trying to restore it on Ultra Sparc 60 Creator 3D machine P/N 600-6474-01. Are these machine compatible with eachother for backup restoration? 5. How can we identify the SCSI Controller being used by the spare machine. Thanks Waseem On Wed, Oct 22, 2008 at 8:20 PM, Gardner, Mark < mark.gardner@xxxxxxxxxxxxxxxx> wrote: > Booted from CDROM and performing a restore the mirror drive should be > turned off. > The primary drive should be connected to the SCSI on the workstation and > not the > added SCSI PCI card. The SCSI card for mirring is slot dependant, make sure > it is in the right slot. Additionally make sure the spare AW51E is the same > model workstation that the backup was made from otherwise it will not work. > The AW51E can be either a Sun Ultra-30 or Sun Ultra-60. The SCSI > controllers > IDs are identified differently on these. The Ultra-30 using "c0" and "c1", > the > Ultra-60 using "c1" and c2". > > -----Original Message----- > From: foxboro-bounce@xxxxxxxxxxxxx on behalf of waseem ghani > Sent: Wed 10/22/2008 7:42 AM > To: foxboro@xxxxxxxxxxxxx > Subject: [foxboro] AW51E backup restoration on mirrored HDD > > Dear All > We have AW51E with 2 external HDD of 18.2GB each. We took "BACKUP" from the > in-service AW station on a tape and trying to restore it on a spare AW51E > with 2 external HDD of 18.2GB each. We followed the procedure vailable in > Invensys document no. B0193ND- REVK page 54 ( Procedure to Restore entire > AP/AW Disk). We have checked the HDD SCSI addresing, SCSI PCI card in slot > 4 > and SCSI cabling configuration etc and found everything OK. > We started the restoration procedure. After the completion of /root and > /usr > directories,we recieved the following message and the restoration process > was terminated: > "Creating the /opt file system > /dev/rdsk/c1t0d0s7:No such device > mount:/dev/dsk/c1t0d0s7 no such device > lost+found : No such file or directory > Warning messages continue--------------------------------------- > > fopen: Read only file system > cannot create save file / restore symtable for > symbole table > abort? [yn]" > > Your valued advice is highly desired and appreciated. > Thanks & regards > > Waseem > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > > > > > * Confidentiality Notice: > This e-mail and any associated files are intended solely for the individual > or entity to whom they are addressed. Please do not copy it or use it for > any purposes, or disclose its contents to any other person. Further, this > e-mail and any associated files may be confidential and further may be > legally privileged. This email is from the Invensys Process Systems business > unit of Invensys plc which is a company registered in England and Wales with > its registered office at Portland House, Bressenden Place, London, SW1E 5BF > (Registered number 166023). For a list of European legal entities within > the Invensys Process Systems business group, please click here > http://www.invensys.com/legal/default.asp?top_nav_idw&nav_id?&prev_idw. > > If you have received this e-mail in error, you are on notice of its status. > Please notify us immediately by reply e-mail and then delete this message > from your system. Thank you for your co-operation. You may contact our > Helpdesk on +44 (0)20 7821 3859 / 2105 or email > inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may > be subject to the terms of any agreements between Invensys (and/or its > subsidiaries and affiliates) and the recipient (and/or its subsidiaries and > affiliates). > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave * Confidentiality Notice: This e-mail and any associated files are intended solely for the individual or entity to whom they are addressed. Please do not copy it or use it for any purposes, or disclose its contents to any other person. Further, this e-mail and any associated files may be confidential and further may be legally privileged. This email is from the Invensys Process Systems business unit of Invensys plc which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within the Invensys Process Systems business group, please click here http://www.invensys.com/legal/default.asp?top_nav_idw&nav_id?&prev_idw. If you have received this e-mail in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Thank you for your co-operation. You may contact our Helpdesk on +44 (0)20 7821 3859 / 2105 or email inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave