Try replacing the RCNI and check your nodebus cable. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Kinsinger, Matthew R Sent: Tuesday, February 11, 2014 2:51 PM To: 'foxboro@xxxxxxxxxxxxx' Subject: [foxboro] 51G boot Issue I have a 51G box that I replaced and noticed the annunciator was not working. I rebooted once to no avail. The next day I rebooted and it won't boot now. During the bootup sequence it does the / file system check and it seems fine. When it starts the IA portion after the copyright and says "NOTICE: vfox_attach" it pauses for a few seconds then says "Program terminated" and goes to the "ok" prompt. Is this a failed or corrupt hard drive? Or a hardware issue? Thanks in advance. I'm trying to avoid restoring the hard drive. Matt Kinsinger PPG Industries Barberton, OH _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave