Hi List Has anybody out there tried the P90's Remote Graphics Unit in a P92 I purchased a P92 Quad 21" NEC LCD's and Foxboro 100 foot (30M) VGA Extension cables the video quality is un-acceptable (operations told me to go away). I tried UTP extenders and they are not much better To do a tidy install I need about 40M The RGU is not qualified for a P92 by Foxboro and it aint cheap but it compares well with 4*Fibre VGA Extension + Keybord extension The RGU also achieves DVI extension which is probably the video mode we should be aiming for now Shaun NOTICE - This message and any attached files may contain information that is confidential, legally privileged or proprietary. It is intended only for use by the intended recipient. If you are not the intended recipient or the person responsible for delivering the message to the intended recipient, be advised that you have received this message in error. Any dissemination, copying, use or re-transmission of this message or attachment, or the disclosure of any information therein, is strictly forbidden. BlueScope Steel Limited does not represent or guarantee that this message or attachment is free of errors, virus or interference. If you have received this message in error please notify the sender immediately and delete the message. Any views expressed in this email are not necessarily the views of BlueScope Steel Limited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave