[foxboro] FBM232 with OPC
- From: "Johnson, David" <David.Johnson@xxxxxxxxxxxxxxxxxx>
- To: "foxboro@xxxxxxxxxxxxx" <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 6 Oct 2011 09:19:39 -0500
Hello all,
I am testing an FBM232 with the OPC client software.
I have the following questions
1) is there an OPC server available for the FBM232
2) if I assume there is not, is there a way to get the client to provide C:B.P
data to a tag without having to go through a DCI block to map the C:B.P to each
tag?
I need some way to get the block count down.
Thanks,
David
________________________________
Confidentiality Notice:
The information contained in this message is private and confidential. This
information is intended only for the individual or entity named above. If the
reader of this message is not the intended recipient, you are hereby notified
that any use, review, dissemination, distribution, copying or action taken
based on this message or its attachments, if any, is strictly prohibited. If
you are not the intended recipient, please contact the sender by reply email
and delete or destroy all copies of this message and any attachments. Thank you.
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] FBM232 with OPC - Johnson, David
