[foxboro] FBM232 and Allen Bradley PLC-5/40E with FDSI Ethernet/Ip
- From: Donato Azevedo <donatoaz@xxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Wed, 28 Apr 2010 10:50:25 -0300
Bothering you gents once again:
I have given up the idea of having one single FBM to communicate with
multiple devices (the idea of having more than one driver image).
I would like to know if I can interface the FBM232 to an A-B PLC-5/40E
using the Ethernet/IP driver.
The PSS says it can interface ControlLogix controllers, but it does
not say whether it supports the PLC-5 Ethernet series or not.
Regards,
--
Donato Azevedo
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] FBM232 and Allen Bradley PLC-5/40E with FDSI Ethernet/Ip - Donato Azevedo
