[foxboro] Env variable from C-shell scripts
- From: "Ghiglione, Alessandro" <Alessandro.Ghiglione@xxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 12 Jul 2007 16:06:41 +0100
Hi to everybody,
This is my first question: It's a real partecipated forum, where I
learnt each day a little bit more!
My question is: from C-shell scripts, I need to know the content of some
environment variable on a specific DMNAME.
I'm curious to know, by querying variables:
1) if a specified DMNAME uses FoxView or DisplayManager -we adopt both
on the same station-.
2) the name of current env provided by FV bottom line -without the
directory path-.
I looked for all documented resources; I got some results at the cost of
embarassing tricks....
Regards,
Alessandro Ghiglione
Senior Application Engineer
Infineum Italia s.r.l.
Strada di Scorrimento,2
17047 Vado Ligure (SV) - Italia
* +39.019.2150.277
mob. +39.3484535196
* +39.019.2150.326
* mailto:alessandro.ghiglione@xxxxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
