[foxboro] Cross node communication
- From: stan <stanb@xxxxxxxxx>
- To: Foxboro List <foxboro@xxxxxxxxxxxxx>
- Date: Sat, 3 Sep 2005 13:22:26 -0400
We are in the final phase of commisioning a Version 7.1.1 system on one unit.
The architecture of this node is CP60's connected in classic Foxboro nes
conected to redundant fiber switches, the W{'s and AW then connect back
to the switches via fiber and RCNI's.
We will be adding another unit soon, that neds to share some data with this
node. The presnt plan is to add thsi new unit to the same node. I'm wondering
if it wouldn't be better to make this 2nd unit a different node? If we did
this, what would our options for sharing control data between the 2 nodes be?
In addition we in the long run will need to share some control data with
an existing node that is a "classic nodebus" system that's at version 6.5
system, what are our options there?
--
U.S. Encouraged by Vietnam Vote - Officials Cite 83% Turnout Despite Vietcong
Terror
- New York Times 9/3/1967
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] Cross node communication
