Hi all, In an I/A Release 7.1 system, we faced the following problem with the foxview or/and alarm manager: After a reboot of one of the installed workstations, a pop up window with an error came up. The message says "Invalid Alarm Manager (Console not in screen list)". At the moment, in this workstation, the alarm manager is not working at all & the foxview that starts automatically after a reboot crashes. So, to have this workstation active, even without the alarm manager, I started a second (because the first one is always crashed down) foxview, manually ( from \opt\fox\wp\Foxview ) and it works properly. Any ideas? Thank you in advance for your support, Aris _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave