[foxboro] CP's on the mesh
- From: "Ron Schafer" <rschafer@xxxxxxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Thu, 24 Jan 2008 08:36:04 -0500
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
=20
>ICC is working quite nicely on MESH systems w/ZCP270, FCP270's, etc.
I like the speed, but the keystrokes are a >little less convenient as I
have to hold the shift key while arrowing along a line of text.
=20
=20
I agree to that, the FCP's are quite fast! Very powerfull too. Now if we
can get the AMRTIN and NASTDB issue in CP60's via the nodebus and ATS
fixed so that it don't have to time out on every block I believe they
too will be very fast.=20
=20
Does anyone know the status of this issue? Its my last personal gripe
about the 8.x versions.
=20
Also, There was an issue with DBVU not working in CP's across an ATS
station and I just found out yesterday that there is a quickfix out to
correct this problem.
Thanks to the people who fixed that because it's a great tool in
troubleshooting unresolved connections.
=20
We've finally completed our upgrade to 8.3 Millwide and my overall
opinion is it's a very good system, reliable, good recording tools, and
in general easily configured.=20
=20
Ronald G. Schafer
Distrubuted Controls System Administrator
White Birch Paper
Bear Island L.L.C. Division
10026 Old Ridge Rd.
Ashland Va. 23005
804-227-4034
Email: rschafer@xxxxxxxxxxxxxxxxxxxxxx
=20
=20
=20
-- No attachments (even text) are allowed --
-- Type: text/x-vcard
-- File: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
-- Desc: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] CP's on the mesh
