Anyone got special tricks for typoing a RTP name
While adding a new RTP I typoed the .parameter its my experience even after
quitting out you can go back in and correct an invalid name but that may only
apply to CMP:BLOCK
When I got back to the RTP configurator the last line is empty and the entry
cannot be deleted or undeleted
Perhaps un wisely added a second new entry with the correct .parameter but
strangely it inherited the description from the incorrect entry this I could
not correct.
Using the ADD/Modify of a single RTP window if you change anything the whole
configurator crashes on going OK
I know the error I typed and can see the entry in SPY
I have attempted FORCE_DELETE but this reported RTP not found
I did manage to FORCE_DELETE the entry I added after the corruption
Is there a trick for FORCE_DELETE by index number I have 4150 as the line in
the RTP configurator but the RTP index shows 4175 in SPY
I have copied out the archiver cfg directory and it is pre error so I probably
could restore this and delete a few .fdf files
I did try the standard STOP xrebuild START and at least it did start but
nothing else
Shaun
________________________________
NOTICE - This message and any attached files may contain information that is
confidential, legally privileged or proprietary. It is intended only for use by
the intended recipient. If you are not the intended recipient or the person
responsible for delivering the message to the intended recipient, be advised
that you have received this message in error. Any dissemination, copying, use
or re-transmission of this message or attachment, or the disclosure of any
information therein, is strictly forbidden. BlueScope Steel Limited does not
represent or guarantee that this message or attachment is free of errors, virus
or interference.
If you have received this message in error please notify the sender immediately
and delete the message. Any views expressed in this email are not necessarily
the views of BlueScope Steel Limited
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
