* -> correction -> The GPIO related RF tests didn't work with emulator for the *stm32f334nucleo*, but it worked for SPI and Serial (I don't know how the tests passes). The GPIO raises segmentation fault. On Thu, Sep 18, 2014 at 6:04 PM, Asif Sardar < engr.asif.sardar@xxxxxxxxxxxxxx> wrote: > Hi, > > The GPIO, Serial, SPI related RF tests works with emulator for the > ellduino. > > The GPIO related RF tests didn't work with emulator for the > stm32f4discovery, but it worked for SPI and Serial (I don't know how the > tests passes). The GPIO raises segmentation fault. > > The GPIO and Serial related RF tests didn't work with emulator for the > stm32f4discovery, but it worked for SPI (I don't know how the tests > passes). The GPIO raises segmentation fault and the Serial prints > infinitely *USART:SR:value=0 -> &(16b)0* > > I will update about the unit tests through python script for ellduino and > stm32f4discovery here soon ! > > > > > On Thu, Sep 18, 2014 at 2:55 PM, Pekka Nikander <pekka.nikander@xxxxxx> > wrote: > >> I have merged the master branch to the encX28J600 branch, meaning that we >> now have a candidate branch to test and push to the master if it works. >> The merged branch includes also Ivan's pull request for the 334nucleo >> Serial. >> >> There are quite a few changes, especially in the emulator interface, and >> therefore this must be tested quite thoroughly before I dare to push this >> to the master: >> >> git clone https://github.com/Ell-i/Runtime.git >> cd Runtime >> git checkout feature-encX24J600-wip >> (cd runtime && make) >> (cd tests && make) >> >> Then run whatever tests you want to: >> >> 1. Test that GPIO, Serial & SPI work on ellduino >> 2. Test that GPIO & Serial work on stm32f334nucleo >> 3. Test that GPIO works on stm32f4discovery >> 4. Test the emulator, preferably with the python scripts >> >> Once I have positive reports on those, I'll push this to the master. >> >> And then, I think, we will be then set for release 0.1! >> >> We will then have rudimentary but working runtime for three boards, >> working emulator for at least some of those boards, and working RF based >> testing framework for them. >> >> In the meanwhile, I will continue committing & creating test cases for >> the Ethernet chip drivers, and then for the actual UDP/IP/CoAP stack. >> >> --Pekka >> >> > > > -- > > > > *With Best Regards,Asif Sardar.+358 43 8265795 <%2B358%2043%208265795>* > -- *With Best Regards,Asif Sardar.+358 43 8265795*