Scott plz post your math on the topic that i made under shooter discusion ----- Original Message ----- From: Art Connolly To: eagleengineering@xxxxxxxxxxxxx Sent: Tuesday, February 07, 2006 6:09 PM Subject: [eagleengineering] Re: shooter belts Before we order longer belts, could we see the calculations. Potential problem with interior space with longer belts. See an email I'm about to send. Art ----- Original Message ----- From: Karen Hillblom To: eagleengineering@xxxxxxxxxxxxx Sent: Tuesday, February 07, 2006 7:23 AM Subject: [eagleengineering] Re: shooter belts well print out and order form and fill it out make sure that the new belt can fit the existing pulleys later ----- Original Message ----- From: scott morgan To: eagleengineering@xxxxxxxxxxxxx Sent: Monday, February 06, 2006 9:56 PM Subject: [eagleengineering] shooter belts according to some calculations I did today we will need to increase the belt length from 25" to 35" in order to accelerate the ball up to full speed in time this was using 1800 rpm for the gearbox output -Scott -------------------------------------------------------------------------- Yahoo! Mail - Helps protect you from nasty viruses.