HI Ann,
Take a look at this document. It has the information listed.
http://www.brailler.com/images/downloads/manuals/CyclonePhoenixgoldTridentManual.pdf
You adjust the dot density in the ETC Braille Setup.
To empty the buffer, Press O on the brailler to take it offline. Then go to
your print queue on your computer to cancel the jobs.
I hope this helps!
Schelli
Schelli M. Realmuto
Itinerant Teacher of the Visually Impaired
Certified Orientation and Mobility Specialist
MATCH Team Consultant
Rochester City School District
30 Hart St. Room E-203
Rochester, NY 14605
Phone: (585) 324-2668
Fax: (585) 324-2669
Cell: (585) 703-5752
"To love what you do and feel that it matters, how could anything be more fun?"
~Katharine Graham~
The information contained in this message may be privileged and/or confidential
and is intended only for the use of the individual or entity to whom it is
addressed. Thank you.
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> On Behalf Of
annfoxworth@xxxxxxxxxxxxx
Sent: Tuesday, June 9, 2020 1:31 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] if you use a Trident Embosser, please respond
**EXTERNAL EMAIL** - This email originated from outside the RCSD. Do not open
links or attachments unless you trust the sender.
I was gifted a Trident Embosser. I know they aren't produced anymore and all
the contact info is out of date, but I cannot find, anywhere in the manual, how
to adjust the strike force. Also, do you know how to empty the buffer?
Ann Foxworth
