Wow, that's an interesting idea. Thanks. We'll think about it. One idea we came up with was to use a print label and place it under the braille. It wouldn't be on the braille but there would be both print and braille. I figure I can emboss the braille, thus saving my hands and fingers from so much work. <g< But we're looking at all options and appreciate your input. Deb B. ________________________________ From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Foxworth,Ann (DARS) Sent: Thursday, February 25, 2010 11:40 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: SPAM?:question about print and braille document Someone else may have a better idea. Maybe you could run your braille paper through the printer to do the print, then through the embosser for the braille, then cut the items out. My experience with this is that it is very difficult to make the print come out underneath the braille. You can printfrom Duxbury in the .dxp file. ANN FOXWORTH, BRAILLE CONSULTANT DARS/DBS CRISS COLE REHABILITATION CENTER 4800 N LAMAR AUSTIN, TX 78756 PH: 512-377-0471 From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Barnes, Deb Sent: Thursday, February 25, 2010 10:13 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: SPAM?:question about print and braille document We have an Express and an old Juliet. Deb B. ________________________________ From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Foxworth,Ann (DARS) Sent: Thursday, February 25, 2010 10:59 AM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: SPAM?:question about print and braille document What kind of embossers do yall use? ANN FOXWORTH, BRAILLE CONSULTANT DARS/DBS CRISS COLE REHABILITATION CENTER 4800 N LAMAR AUSTIN, TX 78756 PH: 512-377-0471 From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Barnes, Deb Sent: Thursday, February 25, 2010 9:55 AM To: duxuser@xxxxxxxxxxxxx Subject: SPAM?:[duxuser] question about print and braille document Hi, I have a need to print up some little pieces of paper that have about a line and a half on them. Thing is, we want the line and a half to be in both print and braille. Is there a way to do that besides having someone write the print? Thanks, Deb B.