Ok, Thanks for that information.
You should be able to move the tractor feed for the paper very slightly to the
right and then run a single page test to see if your page number is position
where you want it.
I’m not sure if the model of the embosser that you are using is one that
embosses interpoint so be sure that if you are embossing interpoint that you
have an even margin on both sides of the paper.
From what you described it will take several test to get the right position for
the placement of the page number in the upper right and lower right corners of
the page.
Good luck.
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> On Behalf Of
Joy Cyr ("dolphinleaps")
Sent: Friday, November 26, 2021 3:02 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Page Numbering
Thanks Milton and my apologies, some of that info was included in my original
message so I forgot that it was no longer handy.
I'm using a Juliet Pro. My paper is eleven by eleven and the line is set to
forty characters. It is also set to twenty-five lines and the top margin is
one. I wasn't aware but I just checked and portrait is selected in printer set
up.
Thank you for requesting the info, if there is anything else helpful I can
provide please ask! I'll look forward to any advice!
Joy
"...on the still cold nights, he pointed his nose at a star and howled long and
wolflike, it was his ancestors, dead and dust, pointing nose at star and
howling down through the centuries and through him." -- Jack London
Begin forwarded message:
From: "Milton" <mota1252@xxxxxxxxx <mailto:mota1252@xxxxxxxxx> >
Subject: [duxuser] Re: Page Numbering
Date: November 25, 2021 at 7:00:06 PM MST
To: <duxuser@xxxxxxxxxxxxx <mailto:duxuser@xxxxxxxxxxxxx> >
Reply-To: duxuser@xxxxxxxxxxxxx <mailto:duxuser@xxxxxxxxxxxxx>
Hi,
Please tell us what embosser you are using, how many characters do you have set
for a line and what is your top margin set for.
Also, what size paper are you embossing on and if you are embossing in portrait
or landscape mode.
All this information will help greatly.
From: duxuser-bounce@xxxxxxxxxxxxx <mailto:duxuser-bounce@xxxxxxxxxxxxx>
<duxuser-bounce@xxxxxxxxxxxxx <mailto:duxuser-bounce@xxxxxxxxxxxxx> > On Behalf
Of Joy Cyr ("dolphinleaps")
Sent: Thursday, November 25, 2021 7:29 PM
To: duxuser@xxxxxxxxxxxxx <mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Re: Page Numbering
Hoping to receive a reply, ... thought I'd try sending my message again.
***
Thank you Elizabeth and George for your replies! Thanks to Elizabeth's
instructions I have succeeded in moving the page numbers into the upper
righthand corner )massive improvement!), however, they are much too close to
the text rather than truly being in the corner. I wondered if that might have
something to do with the concerns you mentioned George? I am in Canada, ... is
there a way to shift them over a few more spaces so that the number truly
appears in the corner? I only upgraded my Duxbury Recently, I'd been running a
version that was several years old for many years and those page numbers were
where they belonged so I'm hoping I can get them back in place.
Thank you very much for all and any help,
Joy
“Just when the caterpillar thought the world was over, it became a butterfly.”
-- Chuang Tzu
Begin forwarded message:
From: <george@xxxxxxxxxxxxxxxxxxx <mailto:george@xxxxxxxxxxxxxxxxxxx> >
Subject: [duxuser] Re: Page Numbering
Date: November 2, 2021 at 2:26:50 PM MDT
To: <duxuser@xxxxxxxxxxxxx <mailto:duxuser@xxxxxxxxxxxxx> >
Reply-To: duxuser@xxxxxxxxxxxxx <mailto:duxuser@xxxxxxxxxxxxx>
Hi Joy,
What country are you based in?
I ask because while UEB is now pretty much universal, formatting, or braille
layout, is a national/country by country issue.
Many countries will follow others, so check with your braille authority if you
have one.
Duxbury has many UEB Templates, and many have either been created, or being
modified accordingly.
George
From: duxuser-bounce@xxxxxxxxxxxxx <mailto:duxuser-bounce@xxxxxxxxxxxxx>
<duxuser-bounce@xxxxxxxxxxxxx <mailto:duxuser-bounce@xxxxxxxxxxxxx> > On Behalf
Of Joy Cyr ("dolphinleaps")
Sent: 02 November 2021 18:46
To: duxuser@xxxxxxxxxxxxx <mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Page Numbering
Good day,
Would anyone have any tips to help me to get my page numbers to Braille in the
upper righthand corner? I've checked in my menu under documents, page
numbering, but I only have buttons to check for the other four corners. Bottom
right is my second choice but not where I want to have them appearing. Any
ideas on how to make this an option I can select would be appreciated.
Joy
“Just when the caterpillar thought the world was over, it became a butterfly.”
-- Chuang Tzu