Thanks David! I'll take a look at Firebird that came with the Juliet 120. We
just got the new embosser a few days ago; so I'm still learning how to use it.
For some reason, I just thought that embossing letters was fairly simple to do.
Tonia
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> On Behalf Of
Scherer, David
Sent: Monday, October 22, 2018 1:15 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: How to emboss print letters
I would suggest using a graphics program and emboss them as graphics. You're
Juliet 120 should have come with a graphics software package. Either create or
import the letters, edit as needed and emboss.
(Unfortunately, there are no graphics programs for the Juliet Pro 60. I tried
to find one for ours, and they are all discontinued and not supported.)
David Scherer
Braille Transcriber
Washoe County School District
Reno, NV
Literacy is for everyone.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
<duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>> on behalf
of Gatton, Tonia (OVR-LV) <Tonia.Gatton@xxxxxx<mailto:Tonia.Gatton@xxxxxx>>
Sent: Monday, October 22, 2018 9:31:48 AM
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Re: How to emboss print letters
Thanks George. If this is the only free avenue for doing this, guess I'll have
to wait until our agency upgrades to DBT 12.3.
T
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
<duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>> On Behalf
Of George Bell
Sent: Monday, October 22, 2018 12:07 PM
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Re: How to emboss print letters
I suspect this might be best done using Duxbury's QuickTac. Go to
https://www.duxburysystems.com/products.asp and then down to Freeware.
George
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Gatton, Tonia ;(OVR-LV)
Sent: 22 October 2018 16:43
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] How to emboss print letters
Hey guys! I'm using DBT 12.1 and a Juliet 120. I also have a Juliet Pro-60.
I'd like some guidance on how to go about embossing print letters. I've seen
this done but never attempted it myself.
Your help is greatly appreciated,
Tonia
"Success is not final, failure is not fatal: it is the courage to continue that
counts." Winston Churchill
Tonia Gatton
Assistive Technology Specialist
Kentucky career Center
KY Office of Vocational Rehabilitation
Charles W. McDowell Center
8412 Westport Road
Louisville, KY 40242
(502) 429-4460 ext. 268
(502) 429-7101
tonia.gatton@xxxxxx<mailto:tonia.gatton@xxxxxx>
