Thanks George. If this is the only free avenue for doing this, guess I'll have
to wait until our agency upgrades to DBT 12.3.
T
From: duxuser-bounce@xxxxxxxxxxxxx <duxuser-bounce@xxxxxxxxxxxxx> On Behalf Of
George Bell
Sent: Monday, October 22, 2018 12:07 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: How to emboss print letters
I suspect this might be best done using Duxbury's QuickTac. Go to
https://www.duxburysystems.com/products.asp and then down to Freeware.
George
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Gatton, Tonia ;(OVR-LV)
Sent: 22 October 2018 16:43
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] How to emboss print letters
Hey guys! I'm using DBT 12.1 and a Juliet 120. I also have a Juliet Pro-60.
I'd like some guidance on how to go about embossing print letters. I've seen
this done but never attempted it myself.
Your help is greatly appreciated,
Tonia
"Success is not final, failure is not fatal: it is the courage to continue that
counts." Winston Churchill
Tonia Gatton
Assistive Technology Specialist
Kentucky career Center
KY Office of Vocational Rehabilitation
Charles W. McDowell Center
8412 Westport Road
Louisville, KY 40242
(502) 429-4460 ext. 268
(502) 429-7101
tonia.gatton@xxxxxx<mailto:tonia.gatton@xxxxxx>