I am also having the same problum. I am trying to select the hole standard midi file to paist in an audio timplet. When I do it I loose all of my patch changes and even the imfornation in the name colum. Can any one tell me how to use multiple midi files with the same audio timplate? ----- Original Message ----- From: "STEVE HAGEMOSER" <shagemoser@xxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, November 13, 2004 11:29 PM Subject: [ddots-l] Re: selecting/key malfunctions/saving projects > Just wanted to add that I've also had problems with trying to select multiple tracks with from and through commands in Sonar plus cake talking (mine is Sonar 2.2). If I thought I was selecting tracks 3 through 6 for example, in reality I only selected 3 and had to go back and individually select 4, 5, and 6 afterwards. > > > ----- Original Message ----- > From: Kevin L. Gibbs > Sent: Saturday, November 13, 2004 1:50 PM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] Re: selecting/key malfunctions/saving projects > > Bryan, > Yes, you are correct with respect to .CWB files. You will lose > all your audio data if you don't save your projects as .CWB files. You > should probably save each file on its own CDR. > Which version of Sonar are you running. I think the version you > have is incapable of running projects of fifty or more tracks with CT. > That would explain your track problem with large projects. AS for the > inability to select multiple tracks between from and through, Gord might > be of more help. > -----Original Message----- > From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] > On Behalf Of Brian Kijewski > Sent: Saturday, November 13, 2004 10:17 AM > To: ddots-l@xxxxxxxxxxxxx > Subject: [ddots-l] selecting/key malfunctions/saving projects > > > Hello: > First off, I have a problem when selecting between the from and through > in > Sonar. > I can set both of them and I can use my control enter to select the > specific track between these points, but when I hold down control and > press enter three times to select all of the tracks between the from and > through, it says that it worked, but when I use my control shift enter > to find out, Jaws says something like: "tracks 1 through 16 are selected > from 1.1 to 10450". Because of this, I cannot make a change to the > entire portion because it does not select properly. I have to press > control enter on the first track and then go down track by track and > press control double enter in order to select all of the tracks. This is > extremely time-consuming. Any suggestions? Also, I have one project that > is about 56 tracks long. When I pass track 50 or so, keys do not work > right. Jaws often skips volume and pan and takes me right to the arm or > solo column. When I do a shift 1 to bring me to the name column, it will > bring me to the maximize strip column or something strange like that. > Any suggestions for this? Lastly, if I want to back up my cakewalk files > onto disc so that I can > retrieve them if my computer crashes or something, should I save them as > > cwb files (cakewalk bundles)? I originally just saved them to floppy as > > cwp files, but I found the audio data folder and realized that there > are > wav files in there that correspond to the .cwp files. Therefore, if I > just > save the .cwp files and my harddrive needed to be re-formatted or > something, > I have a feeling that I'd lose my project's audio, even though I still > have > the .cwp files. Am I correct? > Thanks a lot! > Brian > > _________________________________________________________________ > Take charge with a pop-up guard built on patented MicrosoftR SmartScreen > > Technology > http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU > =http://hotmail.com/enca&HL=Market_MSNIS_Taglines > Start enjoying all the benefits of MSNR Premium right now and get the > first two months FREE*. > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq