[ddots-l] Re: panning in Sonar 4 producer adition
- From: "Joey Stuckey" <stuckey2003@xxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 13 May 2006 22:15:52 -0400
Yeah,
this is what I needed, didn't know those numbers, otherwise I had it.
I've always used a control service, but, I wanted to work on my lap top with
out one, so was having trouble.
Thanks,
Joey
----- Original Message -----
From: Ilkster
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, May 13, 2006 9:52 PM
Subject: [ddots-l] Re: panning in Sonar 4 producer adition
Joey,
On any track's pan field you can either
1) use the small, medium, and large value change keys.
2) press enter, then in the edit field, enter a value from 0 to 127 with 64
being center, 0 being 100% left, and 127 being 100% right. Then press enter
again to exit the edit field.
Press F1 whilst on the pan field, and jaws will tell you all about it. This
is fairly rudementary stuff- is this what you wanted to know, or am I missing
something in your post?
I don't see how you could use the arrow keys if you're using CT. They would
move you off the field-unless you meant to say the value change keys. Are you
using CakeTalking or the free scripts?
----- Original Message -----
From: Joey Stuckey
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, May 13, 2006 9:27 PM
Subject: [ddots-l] panning in Sonar 4 producer adition
Hi,
Maybe I am crazy, but today I swear that I heard JFW say for the first time
when I went to set my pan on an audio track to use the arrow keys or to type in
the value.
Now, I have tried to do this before with no luck and today was no different.
Is there a better way to set the pan with out a control service and with
out pressing the arrow key like 100 times?
I would love to just type in the value.
Can anyone help?
Thanks,
Joey
Other related posts:
