Joey, On any track's pan field you can either 1) use the small, medium, and large value change keys. 2) press enter, then in the edit field, enter a value from 0 to 127 with 64 being center, 0 being 100% left, and 127 being 100% right. Then press enter again to exit the edit field. Press F1 whilst on the pan field, and jaws will tell you all about it. This is fairly rudementary stuff- is this what you wanted to know, or am I missing something in your post? I don't see how you could use the arrow keys if you're using CT. They would move you off the field-unless you meant to say the value change keys. Are you using CakeTalking or the free scripts? ----- Original Message ----- From: Joey Stuckey To: ddots-l@xxxxxxxxxxxxx Sent: Saturday, May 13, 2006 9:27 PM Subject: [ddots-l] panning in Sonar 4 producer adition Hi, Maybe I am crazy, but today I swear that I heard JFW say for the first time when I went to set my pan on an audio track to use the arrow keys or to type in the value. Now, I have tried to do this before with no luck and today was no different. Is there a better way to set the pan with out a control service and with out pressing the arrow key like 100 times? I would love to just type in the value. Can anyone help? Thanks, Joey