[ddots-l] Re: midi setup question
- From: "Omar Binno" <omarbinno@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 28 Oct 2008 00:06:31 -0400
the controler will be controling the module as well as my softsynths.
Omar Binno
AIM: LOD1116
Skype: obinno1
Website: www.omarbinno.com
----- Original Message -----
From: D!J!X!
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, October 27, 2008 10:14 PM
Subject: [ddots-l] Re: midi setup question
do you want the roland controller to controll the module? if so why not just
plug controller out in to module in? or else plug controller out in to 2x2 in,
and module in into 2x2 out...this is how i would do it, if I'm understanding u
right...
HTH, D!J!X!
------------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: Monday, October 27, 2008 7:42 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] midi setup question
Hi Everyone,
I have a midi controler and a roland Module. I'll be connecting both via a
midiman 2x2 midi interface. I haven't used this setup in quite a while, and
want to make sure I have the midi wire configuration correct. I would have 1
midi wire running from the "midi out" of the controler into the "midi in" of
the interface, and I would have 1 midi cable running from the "midi out" of the
module into the "midi in" of the interface. Is this correct?
Thanks.
Omar Binno
AIM: LOD1116
Skype: obinno1
Website: www.omarbinno.com
Other related posts:
