[ddots-l] Re: inspector not working
- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 3 Jul 2008 20:53:52 -0400
Are you sure that all the tool bars that are supposed to be checked are and the
large transport is not checked. That large transport can really cause a lot of
trouble.
Gord
----- Original Message -----
From: Neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Wednesday, July 02, 2008 11:06 AM
Subject: [ddots-l] Re: inspector not working
Thank you for your suggestions. Its not working properly, but its better. If
I want to open the inspector I have to press the letter I and then jaws says
close inspector. Then the inspector will open. In the event view, Jaws reports
the velocity as the duration and the duration doesn't is just a number by
itself. I guess its workable, but I would still like to get it fixed. I looked
around with the jaws curser to see if there other windows open, but couldn't
tell. How would I know what would Jaws say?
------------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave 'SqueezeBox' Carlson
Sent: Wednesday, July 02, 2008 12:01 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: inspector not working
Neville,
I'm sorry it didn't work for you. That was the only solution I had to resort
to and in my case fixed it. I do recall that the vent view also had problems
but too long ago to remember.
Luis' ideas sound promising.
Dave
----- Original Message -----
From: Neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, July 01, 2008 2:48 PM
Subject: [ddots-l] Re: inspector not working
Well Dave I did the system restore several times but still no change. Do
you have any other suggestions?
----------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave 'SqueezeBox' Carlson
Sent: Tuesday, July 01, 2008 3:56 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: inspector not working
Neville,
I had the same problem a couple months ago, and I recall that you and I
discussed it. My problem came up when I was trying out the scrubbing feature.
In any case the resolution was to do a system restore to a day or two
earlier. All fine after that.
I have not tried the scrubbing since then -- not sure I want to , any more.
Dave
----- Original Message -----
From: Neville
To: ddots-l@xxxxxxxxxxxxx
Sent: Tuesday, July 01, 2008 11:33 AM
Subject: [ddots-l] Re: inspector not working
Hear is an update. When I open the inspector Jaws will only say the name
of the widget I was pointing to in the track pain.
--------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On Behalf Of Neville
Sent: Tuesday, July 01, 2008 2:18 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] inspector not working
I don't understand what's going on. On Thursday everything was fine. Now
I'm trying to open the inspector and it won't open. Refreshing doesn't work. Is
there some check box or something like that may be checked accidentally? Could
something like that cause this problem?
Other related posts:
