[ddots-l] Re: hsc build 198 did not fix my issue and I am still not able to read certain things in sonar.
- From: "Phil Muir" <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 25 Sep 2010 22:32:26 +0100
In this instance, HSC is working as advertised. See my other message on
this.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Charles Marston
Sent: 25 September 2010 21:59
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Phil:
I don't know if this is a related issue. I installed HSC 198, which is the
first version that I have ever used. I have JAWS 11, and the latest version
of CT and Sonar. I created some hot spots for SanpleTank. They worked find
as soon as I created them. However, after I closed the program and opened
it again, non of the hot spots worked. I got the same error message as
reported in the messages below. When I used the debug feature, it told me
that the problem was the window class. It expected IKM1450097, but it found
instead IKM1370093, or something like that. After consulting the manual, I
used the editor feature and changed the window class number. Again, the
spots worked just fine after the fix, however, they did not worked after I
closed and reopened the program. The confusing thing is that the debug
feature gave me the same message about expecting IKM 145... and finding
instead IKM 137... I checked the settings for the spot using the editor
feature, and the window class number was correct. Still the spots were not
working.
After reading somemore of the manual, I went ahead and placed an asterisc to
the left of the window class line to have HSC ignore that parameter. Now
the spots are working just fine.
Has anybody else gotten the same message about the window class not being
correct? Did I take the right corrective measure?
From: Phil Muir <mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Sent: Saturday, September 25, 2010 6:07 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Not seeing that here at all. HSC is working as advertised. Think there's
something goofy going on on your system as you are the only one who's
reported that particular issue. Time for a reinstall I think.
Regards, Phil Muir
Accessibility Training
Telephone: US (615) 713-2021
UK +44-1747-821-794
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk/
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: 25 September 2010 10:43
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Correct, Steve. Also, with Sonar 8.5, it seems that you can't use a lot of
the hsc shortcut keys. You have to activate a particular command by getting
to it from the menus.
----- Original Message -----
From: Steve Wicketts <mailto:steve.wicketts@xxxxxxxxxxxxxxxx>
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, September 25, 2010 4:56 AM
Subject: [ddots-l] Re: hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
Cameron,
Forgive me if I'm stating the obvious with HSC, have you used it before, as
I always go to synth rack (Alt 8) arrow down to the particular synth I
want,press P and then start using hot spot clicker.
Steve W
From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, September 25, 2010 4:56 AM
Subject: [ddots-l] hsc build 198 did not fix my issue and I am still not
able to read certain things in sonar.
> Hello everyone. I installed hsc build 198 this evening and it did not fix
> my issue. I am still getting the window not found, hot spot failed
> message
> whenever I try to use hsc sets with any of the soft synths included with
> sonar 8.5 producer. I made sure the proper hsc set was loaded, and I also
> tried picking things from the list instead of using the hsc command and I
> just get the same error message.
>
> On Sunday, I'm going to have a friend help me install a seperat partition
> on
> my system drive that will be for sonar only. until then, is anyone else
> experiencing this?
>
> I don't get it. I'm using the latest hsc sets, latest version of jsonar,
> latest version of jaws ten, all my display settings are correct, yada yada
> yada... and there don't appear to be any dialogue boxes etc blocking the
> dimension pro window for example, at least nothing that the virtual viewer
> or jaws cursor can see.
>
> I can see the presets box with the jaws cursor and the pc cursor in
> dimension pro, rapture le, etc so why doesn't the virtual mouse click that
> hsc does work?
>
> Also, for some reason, jaws is not reading things in lists and it's not
> reading page tabs in dialogue boxes etc. it just says tab, when it should
> say general or drivers etc.
>
> This is only happening in sonar though, even after a total reinstall of
> everything.
>
> Anyone have any explanations or further suggestions?
>
> This happens with both JSonar and the latest version of ct. I've tried
> both.
>
> Thanks,
>
> Cameron.
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus
> signature database 5477 (20100924) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5477 (20100924) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
