Hi. the mic is on a boom stand on the other side of the room. I can't touch the mic and equipment at the same time. Cameron. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson Sent: Saturday, September 19, 2009 4:31 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? How is the mic being held? Free-standing mike stand? Or clipped to a bracket on some other equipment? Are you *not* touching the mic when you also touch some other piece of gear? Dave ----- Original Message ----- From: "Cameron" <cameron@xxxxxxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Saturday, September 19, 2009 10:30 Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? Hi. No no no, it's not just when you touch a mic. it's when you touch anything metal connected to the power conditioner, like the control surface, computer, audio interface, and the conditioner itself. as soon as the mic is unplugged, everything is back to normal. Cameron. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of D!J!X! Sent: Saturday, September 19, 2009 2:02 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? Interesting, and you get shocked everytime you touch a mic plugged into the mixer??? How about when you touch the mixer itself? D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Cameron Sent: Saturday, September 19, 2009 12:45 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? carpet. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of D!J!X! Sent: Saturday, September 19, 2009 1:36 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? Put on shoes and try it, or wait, are you on carpet? D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Cameron Sent: Saturday, September 19, 2009 12:32 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? Hi. not wearing shoes, my desk is not metal, and I am not touching the mics when I get shocked. although, touching the mics will shcok me too if I do. they are all 3 prong outlets. Cameron. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of albertm13@xxxxxxxx Sent: Saturday, September 19, 2009 9:57 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: getting shocked by equipment in home studio, any suggest ions? Hi, If you have three pronged outlets you could possibly start by going to a hardware store and buying an outlet tester. Sorry, I couldn't find one at homedepot.com. You can read about them at en.wikipedia.org/wiki/Receptacle_tester and www.acmehowto.com/howto/homemaintenance/electrical/outlettest.php Make sure you get one that can be plugged into the outlet and not just put near the outlet. You would need sighted help because they only have lights. They are not expenssive. If you have two pronged outlets then it's probably a bad piece of equipment on your end but turning the plugs around might help. I don't know of an easy way for you to test for the problem without a voltmeter. If the problem isn't your house wiring then you need someone who could figure out what piece of your equipment is causing this problem. Old pieces of equipment like a tube amps are notorious for causing this problem. Whenever you get shocked, electricity flows through you which means it has to go in one part of you and out another. Birds on power lines don't get killed because they are only touching one thing. You are touching your mics but you must be touching something else too. That's why someone else recommended a rubber mat. Using a rubber mat is only hiding the problem but the problem is still there. Are you wearing shoes? Perhaps your desk is metal and it is touching something. Albert --- Cameron wrote --- Hi all. I have a problem, hopefully someone can give me some suggestions or shed some light on why this is happening. The apartment complex I'm living in now was built in the early sixties I believe. The outlets are not very good, worn out, you can't plug anything into the top of any of them because it just falls out. You can only plug things into the bottom plug. Anyways, when I was using my FW1884, I didn't notice any issues with anything except for noise because I am on a dirty circuit/loop being shared by all sorts of appliances and god knows what else. My current setup is now my ADK rack mount machine, Motu896 MKIII firewire interface, and BCF2000 control surface, which is all plugged into a power conditioner. I started doing some tracking with my new gear for a new job this week and whenever I used a mic that required phantom power, as soon as the mic was plugged into the interface, I would get shocked if I touched anything metal that was plugged into the conditioner, including the mic itself computer, control surface, interface, etc, . It's not enough to cause damage, but it is unplesent and is enough of a jolt to make you quickly stop touching whatever control you're touching. This happens even when the phantom power is switched off for every channel on the interface. I found out this afternoon that it also happens with dynamic mics too. As soon as all mics are unplugged, everything is fine. My power conditioner doesn't appear to have a ground lift switch. Is this the issue? Is there anything I can do to remedy this? I've got 5 months of writing and recording ahead and I really don't want to be freaking shocked every time I touch my gear! I'm going to make this issue known to the apartment manager on Monday but I really doubt they will understand what I'm talking about, or give a damn for that matter. Any thoughts would be greatly appreciated! Thanks, Cameron. ____________________________________________________________ Best Weight Loss Program - Click Here! http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsEGrEk4pskLBP4ZOsBHxT0WgIY T56vO82nb4RJqjhTY7eqkoksJUk/ PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq