[ddots-l] Re: Saving as mp3.
- From: "Phil Halton" <philhalt@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 27 Nov 2006 11:13:12 -0500
Hello Richard,
OK, Here goes. First, read any documentation that came with the LAME
package. I am using lame version 3.96, but I think the current version is
up to 3.97--doesn't matter--whatever you have is good. Now, in the
ProgramFiles\cakewalk\shared utilities folder, there is a help file called
ExtEncoderCFG.chm that explains the process of installing lame as an
external MP3 encoder in Sonar. BTW, I put lame in a folder under the shared
utilities folder, but it dowsn't matter where on your HD you put it.
1) there are preset lame profiles that came on your sonar disk that you can
use, but they're a little outdated. Instead, I used the preset profiles
that came with the lame package itself-the lame documentation will explain
these presets.
.
2) basically, you go into sonar's menu system and select Tools|Ext Encoder
Config which brings up a dialog for setting up external encoders. After
reading that help file I mentioned, you should be able to set up lame as
your external MP3 encoder.
To make life a little easier, I'm sending you offline a file that contains
all the profiles for the 5 Lame presets. Import that file into the external
encoder config dialog. Otherwise, you'll have to fill in all the dialog box
fields yourself(which might not be a bad idea for learning purposes).
----- Original Message -----
From: "Richard Synnott" <richardsynnott@xxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, November 26, 2006 11:35 PM
Subject: [ddots-l] Saving as mp3.
Hi Phil,
I've downloaded and saved the lame encoder on my pc.
Can you give me an overview of what I need to do now.
Many thanks for your help.
Richard.
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
