[ddots-l] Re: Recording with the monitors turned off.
- From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 28 May 2005 15:21:05 -0400
Phil. To my knowledge, I can't run two separate mixes, but I am still
tweaking my setup as well. Since I do mostly my own recording and I am not
recording somebody else, I don't need separate mixes. I could route the
headphone amp into aux bus 4, but it would probably be in mono and I don't
want to mess with a system that works.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Friday, May 27, 2005 2:38 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Recording with the monitors turned off.
Well, I have everything running into the mixer. I can then route hardware
wherever I like. I have the main outputs of my MOTU 2408 going into the
mixer. I also have a Sound Blaster Live Platinum that I use for Jaws going
through the mixer and the vocal mike plugged into the mixer.So Damon, how do
you route everything so that you can here your vocal mike? Is it possible
to run two completely separate mixes with the way you have things set-up? I
am always open to doing things in a new way.
Regards, Phil Muir
P J Muir Productions
URL:
www.philmuir.com/
----- Original Message -----
From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, May 27, 2005 7:14 PM
Subject: [ddots-l] Re: Recording with the monitors turned off.
> Hmmm. Maybe it is our setup that is different, because I could do that now
> without affecting recording. I run from my aux out 1 and 2 of my 01v to
> delta 66 inputs 1 and 2 and I never put my playback track into the bus, so
> when I do vocals, I can turn the playback track down and it never affects
> anything. And jaws never goes through my mixer anyway. But, hey, to each
> their own.
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
> Behalf Of Phil Muir
> Sent: Friday, May 27, 2005 1:53 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Recording with the monitors turned off.
>
> So that I can give clients who come into the studio a separate mix. That
> way, I can tailor the mix to the client. So for example, if the client
> wants more of there vocal or, less of the backing track then, I can do
that.
> This also provides clients with a Jaws free mix in there headphones which,
I
> am sure they appreciate.
>
> Regards, Phil Muir
>
> P J Muir Productions
> URL: www.philmuir.com/
> ----- Original Message -----
> From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Friday, May 27, 2005 5:53 PM
> Subject: [ddots-l] Re: Recording with the monitors turned off.
>
>
> >I am using a presonus hp4 headphone preamp which I run out of the
headphone
> > jack on my mixer. You don't need to match brands. The HP4 costs about
$100
> > or so and it is a really great piece. Phil. You mentioned running the
> > headphone amp out of one of the aux buses on the mixer. Why would you do
> > this as opposed to running out of the headphone jack? Just curious.
> >
> > -----Original Message-----
> > From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> > Behalf Of Jim Jackson
> > Sent: Friday, May 27, 2005 12:37 PM
> > To: ddots-l@xxxxxxxxxxxxx
> > Subject: [ddots-l] Re: Recording with the monitors turned off.
> >
> > Phil, would the amp have to something from mackie, since my mixer is and
> if
> > not, what's a very reasonably priced amp? Thanks
> >
> > -----Original Message-----
> > From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> > On Behalf Of Phil Muir
> > Sent: Friday, May 27, 2005 12:46 PM
> > To: ddots-l@xxxxxxxxxxxxx
> > Subject: [ddots-l] Re: Recording with the monitors turned off.
> >
> > Hi Jim!!
> >
> > You could purchase a headphone amp. You could then plug all of your
> > headphones into that. You would then plug the headphone amp into one of
> the
> > Aux's on your Mackie
> > 1202 mixer. I have a very
> > reasonably priced Berenger headphone amp here. I can plug in 4
headsets.
> > You can get ones with more headset sockets than that. I have scene ones
> > with 8 inputs.
> >
> > Regards, Phil Muir
> >
> > P J Muir Productions
> > URL:
> > www.philmuir.com/
> > ----- Original Message -----
> > From: "Jim Jackson" <cs2005@xxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Friday, May 27, 2005 5:21 PM
> > Subject: [ddots-l] Recording with the monitors turned off.
> >
> >
> >> Hello all, I'm planning a project which consists of more than one
> > backup
> >> vocals, I want to record them all at once without using my audio
> >> monitors because of all the things that would feed in to the mics via
> >> the monitors. I assume that there would be something that I could buy
> >> that would plug in to my phone jack on my Mackie 12.02 mixer that
> > would
> >> enable me to plug in multiple pairs of headsets. Can some one confirm
> >> this for me or suggest some other way of getting things done? Thanks
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >>
> >>
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
