[ddots-l] Re: ] Re: Problemns withSibelius
- From: "Dave Carlson" <dgcarlson@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 8 Nov 2005 09:29:12 -0800
James,
Just replied to your other message. I should read all topics
before sending.
In any case you might want to check the documentation. I
don't use an XP machine, but thought I remember that some
graphics were not usable in that platform? I'll hope that
Dancing Dots jumps in here with their input or questions.
Also I don't remember test 7. Is that the one where the
Sibelius scripts are enabled? If so you may want to make
sure you've used the default location for your Sibelius
documents as defined in the file/properties/general dialog.
If not then let me know so I can dig up a dissertation I
wrote on the subject of how to work around that one. It
haunted me for quite a while.
Dave
----- Original Message -----
From: "James Malone" <malone_j@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, November 07, 2005 7:37 PM
Subject: [ddots-l] Re: ] Re: Problemns withSibelius
Hi All again, Solved the properties and key pad issues. Now
its graphics
recognition, and I can't seem to run test 7.
James
_____
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of James Malone
Sent: Monday, November 07, 2005 5:46 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] ] Re: Problemns withSibelius
Hi all:
Okay, I got rid of the pesky startup window in Sibelius.
Now, when I run the
test or configure 4 setting, I now get the properties and
keypad is not
seen.
any thoughts on this?
This is on my laptop with xp.
James
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
