Hi Bill,
This seems to have taken care of the issue. Thanks a bunch. I was at a total
loss
Grant
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Bill
Sent: Tuesday, October 13, 2015 10:28 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems with track area selection
Hello, Grant and Eddie,
If you are running CakeTalking 8.8, please run the ResetToolBars utility
from CakeTalking's submenu on the Windows Start Menu. Be sure to first
close all programs.
I believe that you both have CT 8.8 but, for anyone running an earlier
version of CakeTalking, the simplest way to reset the tool bar settings is
to reinstall your version of CakeTalking. No need to uninstall anything
first. If CakeTalking has been authorized already on that machine, there
will be no need to request new authorization after reinstalling CT.
Bill
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Grant
Sent: Sunday, October 11, 2015 10:50 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems with track area selection
I am using f5 pressed several times to go to time and manually typing in my
needed location. BTW, I am fully aware of using the select by time dialog
with no issue. I was simply letting everyone know that I have tried other
ways to select a specific area. In either instance, once an area is reported
to be selected; and I press he delete key, the entire track is removed
regardless of the area of time selected. Also, I am using an ADK computer
purchased through DD, a Mackie 1640I and CT and Sonar 8.5 if this helps. I
am curious if the other fellow with the same issue is using the same?
Thanks for the suggestions,
Grant
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Kevin Gibbs
Sent: Thursday, October 08, 2015 12:16 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems with track area selection
F5 does not move you to the start position. F7 does that, I think F5 can be
used to tell you where you are. Then, you can type all GT and type a new
value in the box which opens.
Sent from my iPhone
On Oct 7, 2015, at 2:52 PM, grant <flybynight@xxxxxxxxxxxx> wrote:background to interfere with sonar or CT.
Eddie and I have the exact same issue. As Bill described, I too am
making a selection on an audio track of a small area and once selected
I press the delete key. As soon as I do that, my focus automatically
moves to bar 1 of the same track and my entire track has been deleted.
I have also tried to make my selection by moving to the time position
by pressing the f5 key to move to time and manually setting the from
and through times and then control enter to make the selection. I get
the same results. I have also tried shutting down the project and
trying again with no luck. There are no other applications running in
the
GrantThoughts?
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Bill
Sent: Tuesday, October 06, 2015 5:31 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems with track area selection
Hi, Eddie,
Perhaps you just misspoke into your iPhone but, just in case, the
proper order of operations is to first set your From and Through times
and then to press CONTROL+ENTER. You actually wrote:
When selecting an area in a track by hitting control plus enter, thenhitting F9 and F10 for the from and through Time selection,
HTH,
Bill
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of grant
Sent: Tuesday, October 06, 2015 4:47 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems with track area selection
I have the same issue with the time selection and have yet to find a
work-a-round. I have to re-do the selection process etc several times.
Pressing F6 some times will finally allow the proper selection, but it
shouldn't be this difficult. I hope someone has some ideas
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Tyo
Sent: Wednesday, September 30, 2015 10:35 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems with track area selection
Eddie,
Just to clarify things a bit more for you: When you define your from
and through points, you're actually defining the area you want to
select on a track; so when you hit Ctrl-Enter, you're selecting that
area, and nothing else on the track.
Cheers!
Mike
----- Original Message -----
From: "Eddie Salcido" <rednexican75@xxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, September 30, 2015 18:51
Subject: [ddots-l] Problems with track area selection
Sent from my iPhone hello, I'm having the following problem. When
selecting an area in a track by hitting control plus enter, then
hitting F9 and F10 for the from and through Time selection, I end up
erasing the entirety of my track instead of just my selected area.
EddiePLEASE READ THIS FOOTER AT LEAST ONCE!
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
