1. This only started happening recently, and it happens on any project I
open.
2. To those three explanations, yes, yes, and yes.
3. I've already tried restarting Sonar, and restarting my computer, and even
switching JAWS off and on, but nothing's changed.
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of A Ker
Sent: Thursday, July 30, 2020 6:28 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Pressing F5 Quickly and Possible SOlutions to Your
Problem
Greetings Annabelle,
Could you please tell me since when you confront this technical problem:
impossibility to edit the times and frames on your projects? So do you mean
that if you press F5 quickly anywhere between once and thrice, it works the
way it should? So youd know the bar number (F5 once) and the time stamps
(F5 twice), and you can edit the bar number (F5 thrice). However, editing
the time and the frames does not work, as an error returns.
Pressing F5 once or twice allows you to receive some information about the
bar numbers, the tick, and the time stamps, while pressing this key three or
four times allows you to edit these pieces of data associated with pressing
F5 once or twice. In this context, the number 4 represents danger (finishing
a tournament in fourth place or lower sends you to hell, meaning no prize,
compared to the top three which keeps you safe). That been said, you can
press F5 between once and thrice and it works normally?
I would propose you to switch JAWS or whatever the screen reader. If the
error returns, switch off your computer then try again upon reloading SONAR
or your project.
Thank you. I hope you will resolve the problem.
Adel
De : ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] De
la part de Annabelle Susan Morison
Envoyé : 30 juillet 2020 18:19
À : ddots-l@xxxxxxxxxxxxx
Objet : [ddots-l] Re: Strange Error with F5 and F5
What seems to be happening is, I want to go to a specific area in a
recording, and from what I understand, you can either go to a "Measure,
Beat, and Tick (MBT)", which I'm able to do when I press F5 three times
quickly, or you can go to an "Hour Minute, Second, and Frame" (HMSF), by
pressing F5 four times quickly, then an edit field is supposed to pop up,
where you can type a number like "00:13:42:607".. However, when I press F5
four times quickly, that's when the error occurs, where a message pops up
that says, "Failed to find the HMSF Toolbar edit field.".
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of A Ker
Sent: Thursday, July 30, 2020 2:42 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Strange Error with F5 and F5
Annabelle, quest-ce qui cloche? In French, that may mean: What is wrong?
Cest étrange. Comment pourriez-vous résoudre ce problème?
Merci.
Adel
De : ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] De
la part de Annabelle Susan Morison
Envoyé : 30 juillet 2020 16:14
À : ddots-l@xxxxxxxxxxxxx
Objet : [ddots-l] Re: Error with Toolbars in CaketalkingError message and F5
I've never heard it put that way before, but yeah I guess you could say
that's what's happening.
_____
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of A Ker
Sent: Thursday, July 30, 2020 9:57 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Error with Toolbars in CaketalkingError message and
F5
Hello Annabelle,
Usually, pressing this key, F5 at this frequency (4X), allows SONAR users to
guide the cursor to the time stamp in the project. Your problem is that an
error occurs when you want to edit the time stamps on Sonar?
Thank you.
Adel
De : ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] De
la part de Annabelle Susan Morison
Envoyé : 30 juillet 2020 10:13
À : ddots-l@xxxxxxxxxxxxx
Objet : [ddots-l] Error with Toolbars in Caketalking
Hi, it's Annabelle.
When I press F5 four times quickly, I get an error message that says,
"Failed to find HMSF Toolbar Edit Field". However, it doesn't say how to fix
the error. This has never happened before. Is there an easy solution to this
problem?
