[ddots-l] Re: Odd issue with Sonar 8 installation

  • From: "Darren H" <darren@xxxxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Mon, 13 Sep 2010 15:29:09 +0100

Hi Bryan.

All appears to be OK now.

I did a scan of all my hard drives, so one of the installs must've gone
somewhere I wasn't aware.

I'll be glad to get my production system back.
 
Cheers
Darren
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Bryan Smart
Sent: 13 September 2010 15:16
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Odd issue with Sonar 8 installation

Darren, when installing Sonar 8.5, it should have asked if you wanted to
perform the recommended install, or a custom install. Did you go with
recommended? If so, then those plugs would have been installed in the
standard locations. Also, Sonar scanns for plugs when you start it for the
first time, so it should have found them.

If you don't have a Sonar 8.5 install DVD, then the process is a bit more
frustrating. You have to install 8, then upgrade to 8.5, then upgrade to
8.52, and, finally, upgrade to 8.53. I've never run that complete journey. I
have an 8.5 disk. Maybe some problems along that long path.

Bryan 

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Darren H
Sent: Friday, September 10, 2010 5:21 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Odd issue with Sonar 8 installation

Hi folks.
 
This installation, along with the sound card issue has proven to be more
problematic than it's worth.
 
I've isntalled All of the Sonar content from Sonar 8 and done all of the
upgrades up to 8.53.
 
However, there are a lot of plugs missing.
 
For example, I can see session Drummer 2, but not Session Drummer 3.
 
The Vocal and Percussion strip are not there, plus a fair few other items.
Should I scan my entire system for the plugs in case they've been
misaddressed?
 
Cheers
Darren
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq

PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, 
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to 
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq

Other related posts: