[softwarelist] Re: CMYK and RGB
- From: David Pilling <flist@xxxxxxxxxxxxxxxxxxx>
- To: davidpilling@xxxxxxxxxxxxx
- Date: Sun, 27 Aug 2006 17:39:58 +0100
In message <44F1B651.2090808@xxxxxxxx>, Clive Bonsall
<C.Bonsall@xxxxxxxx> writes
I've just finished editing a document in OPW that was imported from OP
(RiscOS) with font mapping. PrePress reveals one problem:
"Black not defined in CMYK model"
What it means is that Black is defined in another colour model besides
CMYK. So all you need to do is change the colour model for it.
Misc->Edit Colours
Select black
Click on Edit
Click on CMYK
Click on OK
Click on OK
ISTR that the original versions of OP, before the colour supplement
defaulted to defining Black in the RGB model.
Traditionally this is only a potential problem if you are going to print
separations. However if you're using OPW with direct PostScript enabled
the colour model will actually reach the PostScript output.
--
David Pilling
email: david@xxxxxxxxxxxxxxxxxxx
web: http://www.davidpilling.net
post: David Pilling P.O. Box 22 Thornton Cleveleys Blackpool. FY5 1LR UK
fax: +44(0)870-0520-941
Other related posts:
